Long-term super-resolution imaging of mitochondrial dynamics

Monitoring dynamics of mitochondria has become an essential approach to explore the function of mitochondria in living cells with the emergence of super-resolution fluorescence microscopy. However, long-term super-resolution imaging of mitochondria is still challenging due to the lack of photostable fluorescent probes and stable mitochondria-specific markers which are not affected by the changes of mitochondrial membrane potential. Here, we introduce a method for long-term imaging mitochondrial dynamic through the SNAP-tag fluorogenic probe based on 4-azetidinyl-naphthalimide derivatives. Using structured illumination microscopy (SIM), we observed the fusion and fission of mitochondria over a course of 16 min at 109 nm resolution. Furthermore, the interactions as well as fusion between mitochondria and lysosomes were studied during mitophagy at the nanoscale. Convincingly, the combination of SNAP-tag fluorogenic probes and super-resolution fluorescence microscopy will offer a new way to monitor dynamic mitochondria in living cells.     

通过"双离子键"固载于季鏻盐聚合物的[Rh(CO)I3]2–物种在多相乙醇羰基化中的应用

贵金属物种(Rh或Ir络合物)在均相羰基化和氢甲酰化催化过程得到了广泛的应用,但始终存在分离繁琐等问题,其均相多相化可很大程度上简化分离操作,故一直广受重视.单位点催化剂因其具有可与均相相比拟的较高金属利用率和选择性而成为均相多相化的重要研究方向之一.研究发现,在碘物种存在的情况下用于固载金属物种的配位键容易断裂,进而导致金属物种的流失,而通过离子键固载的[Rh(CO)₂I₂]^–物种更加稳定,比如著名的甲醇羰基化“Acetica^TM”工艺中,[Rh(CO)₂I₂]^–负一价阴离子物种是以离子键的方式固定在带有阳离子骨架的甲基化聚乙烯吡啶树脂上.与甲醇羰基化过程类似的乙醇羰基化过程是生产重要化工中间体丙酸的主要途径之一,但该过程的均相多相化始终存在着稳定性差这一关键问题.为了解决这一问题,基于之前将固载于季鏻盐聚合物的[Rh(CO)I₃]^2–应用于甲醇羰基化的工作,我们将类似的季鏻盐聚合物固载Rh基催化剂Rh-TPISP用于多相乙醇羰基化过程,通过多种表征进一步证明了Rh物种和P物种结构,并提出了“双离子键”模型.P的K边XANES证明了聚合物TPISP的季鏻化阳离子骨架特征.HAADF-STEM测试表明Rh-TPISP中的Rh呈现单位点分散的状态.Rh的XPS和XANES结果证明了Rh-TPISP中Rh物种的价态介于0~+1.通过EXAFS的拟合解析给出了[Rh(CO)I₃]^2–活性中心结构.由于[Rh(CO)₂I₂]^–为经典的羰基化活性中心,为了进一步证明该结构的正确性,我们将Rh-TPISP的EXAFS和IR谱图与标样[PPh3Et]⁺[Rh(CO)₂I₂]^–对比发现:在EXAFS谱图中,Rh-TPISP中的Rh-C峰高低于[PPh3Et]+[Rh(CO)₂I₂]^–的Rh-C峰高,而Rh-TPISP中的Rh-I峰高高于[PPh3Et]+[Rh(CO)₂I₂]^–的Rh-I峰高,这就说明Rh-TPISP中Rh物种的Rh-C配位数小于2,而Rh-I配位数大于2;在IR谱图中,标样[PPh3Et]+[Rh(CO)₂I₂]^–中有两个羰基振动峰,与该物种的两个Rh-C配位键相符,而Rh-TPISP中的只有一个羰基振动峰,说明Rh-C配位数为1.因此,Rh-TPISP催化剂的季鏻盐骨架中的每个P物种带有一个正电荷,每个带有两个负电荷的[Rh(CO)I₃]^2–通过与两个[P]⁺的静电作用进行固载,形成“双离子键”结构.该催化剂在固定床乙醇羰基化过程中表现出优异的羰基化活性、选择性和稳定性.在3.5 MPa、195 oC反应近1000 h后,Rh-TPISP催化剂TOF保持在约350 h–1,丙酰基选择性为95%以上,高出所有文献报道的均相和多相乙醇羰基化活性.其较高的活性主要是因为[Rh(CO)I₃]^2–比传统Rh活性相[Rh(CO)₂I₂]^–具有更强的富电子性,而较高的稳定性主要是由于“双离子键”这种强静电作用比“AceticaTM”工艺中“单离子键”更有利于Rh物种的固载.故Rh-TPISP催化剂中的“双离子键”对其优异的催化性能具有极其重要的作用,对后续多相乙醇羰基化的发展具有重要意义.     

基于氮杂Mn咔咯二维纳米材料的单原子Mn中心催化氧化烷烃制醇

咔咯是由四个吡咯共轭相连而形成的具有芳香性的新型卟啉类大环化合物,但咔咯分子中存在一个直接连结两个吡咯环的C?C键,与卟啉相比,仅仅是少了一个“meso”位置的C原子.因此,在结构上,咔咯含有三个“吡咯型”氮原子和一个“吡啶型”氮原子,当咔咯失去三个内氢原子后变成了三价阴离子,易与金属形成高价态的稳定配合物.氮杂咔咯是一种咔咯的meso位上的C被取代为N的咔咯衍生物.与正常的咔咯相比,它更易于与过渡金属形成稳定配合物.正是由于这些独特的结构特点,使其在金属催化、染料敏化太阳能电池、光敏剂、金属传感器、甚至在医学上都有很好的应用前景.金属有机大环均相催化剂的非均相化,是改进反应产物分离和实现催化剂循环使用的最简单有效方法之一.环境友好的Mn氮杂咔咯催化剂,在温和条件下可以利用氧气直接将有机底物氧化.本文选用Mn氮杂咔咯催化剂作为基本构建单元,通过理论计算,构建了一种新型的具有高催化活性的含Mn氮杂咔咯环结构单元的二维纳米催化材料.我们分别使用高斯软件(Gaussian 09)和维也纳从头算模拟软件包(VASP)对孤立分子和周期性体系进行结构优化以及性质的计算.在这种二维材料中,每一个Mn原子作为相对独立的金属单原子中心(SAC),保留了单环中Mn金属中心的高催化活性.在温和的光照条件下,Mn金属中心可以直接活化氧气生成类自由基[Mn]-O-O中心,随后[Mn]-O-O中心可以有效地通过夺取有机底物中的H和紧接着新生自由基的偶合反应,选择性氧化C?H键为C?OH键.另外,通过沿[Mn]-O-O反应轴施加不同强度的外电场,可对此二维纳米材料的催化反应活性进行精细调控.本文为实验上制备基于Mn氮杂咔咯的非均相催化剂以及单原子Mn基催化剂提供了理论依据.     

Palladium supported on urea-containing porous organic polymers as heterogeneous catalysts for C–C cross coupling reactions and reduction of nitroarenes

The novel palladium nanoparticles (Pd@POPs) were successfully prepared with controllable sizes and dispersity through the introduction of H₂PdCl₄ into urea-linked porous organic polymers (POPs) in an aqueous environment followed by reducing Pd(II) to Pd(0) by NaBH₄. The newly prepared Pd@POPs were thoroughly characterized by FT-IR, ICP-AES, BET, XRD, SEM and TEM. Furthermore, the catalytic reactivities of this novel Pd@POPs were investigated via Heck, Suzuki-Miyaura cross-coupling reaction and nitroarene reduction, and they exhibited superior catalytic performances in all these three reactions, producing the corresponding products in up to quantitative yields. Additionally, the Pd@POPs had excellent recyclability in both Heck and Suzuki-Miyaura cross-coupling reactions with the repeating time up to four times and ten times, respectively, along with no obvious decrease of catalytic reactivities.     

多种超分辨荧光成像技术比较和进展评述

所见即所得是生命科学研究的中心哲学,贯穿在不断认识单个分子、分子复合体、分子动态行为和整个分子网络的历程中。活的动态的分子才是有功能的,这决定了荧光显微成像在生命科学研究中成为不可替代的工具。但是当荧光成像聚焦到分子水平的时候,所见并不能给出想要得到的。这个障碍是由于受光学衍射极限的限制,荧光显微镜无法在衍射受限的空间内分辨出目标物。超分辨荧光成像技术突破衍射极限的限制,在纳米尺度至单分子水平可视化生物分子,以前所未有的时空分辨率研究活细胞结构和动态过程,已成为生命科学研究的有力工具,并逐渐应用到材料科学、催化反应过程和光刻等领域。超分辨成像技术原理不同,其具有的技术性能各异,限制了各自特定的技术特色和应用范围。目前主流的超分辨成像技术包括3种:结构光照明显微镜技术(structured illumination microscopy, SIM)、受激发射损耗显微技术(stimulated emission depletion, STED)和单分子定位成像技术(single molecule localization microscopy, SMLM)。这些显微镜采用不同的复杂技术,但是策略却是相同和简单的,即通过牺牲时间分辨率来提升衍射受限的空间内相邻两个发光点的空间分辨。该文通过对这3种技术的原理比较和在生物研究中的应用进展介绍,明确了不同超分辨成像技术的技术优势和适用的应用方向,以方便研究者在未来研究中做合理的选择。     

Structurally Modelling the 2-His-1-Carboxylate Facial Triad with a Bulky N,N,O Phenolate Ligand

We present the synthesis and coordination chemistry of a bulky, tripodal N,N,O ligand, Im^Ph2NNO ^{t Bu} ( L ), designed to model the 2-His-1-carboxylate facial triad (2H1C) by means of two imidazole groups and an anionic 2,4-di-tert-butyl-subtituted phenolate. Reacting K-L with MCl₂ (M = Fe, Zn) affords the isostructural, tetrahedral non-heme complexes [Fe(L)(Cl)] ( 1 ) and [Zn(L)(Cl)] ( 2 ) in high yield. The tridentate N,N,O ligand coordination observed in their X-ray crystal structures remains intact and well-defined in MeCN and CH₂Cl₂ solution. Reacting 2 with NaSPh affords a tetrahedral zinc thiolate complex, [Zn(L)(SPh)] ( 4 ), that is relevant to isopenicillin N synthase (IPNS) biomimicry. Cyclic voltammetry studies demonstrate the ligand's redox non-innocence, where phenolate oxidation is the first electrochemical response observed in K-L , 2 and 4 . However, the first electrochemical oxidation in 1 is iron-centred, the assignment of which is supported by DFT calculations. Overall, Im^Ph2NNO ^{t Bu} provides access to well-defined mononuclear, monoligated, N,N,O-bound metal complexes, enabling more accurate structural modelling of the 2H1C to be achieved.     

Robust nickel silicate catalysts with high Ni loading for CO2 methanation

CO₂ is the main component of greenhouse gases and also an important carbon source. The hydrogenation of CO₂ to methane using Ni-based catalysts can not only alleviate CO₂ emissions but also obtain useful fuels. However, Ni-based catalysts face one major problem of the sintering of Ni nanoparticles in the process of CO₂ methanation. Thus, this work has synthesized a series of efficient and robust nickel silicate catalysts (NiPS−X) with different nickel content derived from nickel phyllosilicate by the hydrothermal method. It was found that the Ni loading plays a critical role in the structure and catalytic performance of the NiPS−X catalysts. The catalytic performance gradually increases with the increase of Ni loading. In particular, the highly dispersed NiPS-1.6 catalyst with a high Ni loading of 34.3 wt% could obtain the CO₂ conversion greater than 80%, and the methane selectivity was close to 100% for 48 h at 330 °C and the GHSV of 40,000 mL g⁻¹ h⁻¹. The excellent catalytic property can be assigned to the high dispersion of Ni nanoparticles and the strong interaction between the active component and the carrier, which is derived from a unique layered silicate structure with lots of nickel phyllosilicate and a large number of Lewis acid sites.     

Aprotic Amine-modified Manganese Dioxide Catalysts for Selectivity-tunable Oxidation of Amines

Organic modifiers have shown promising potential for regulating the activity and selectivity of heterogeneous catalysts via tuning their surface properties. Despite the increasing application of organic modification technique in regulating the redox-acid catalysis of metal oxides, control of the acidity of metal oxide catalysts for enhanced reaction selectivity without sacrificing their redox activity remains a substantial challenge. Herein, we show the successful control of redox-acid catalysis of metal oxides with aprotic tertiary amine modifiers. Robust modification of manganese dioxide catalysts with N,N-dialkylcyclohexylamine selectively blocks the Lewis acid sites, with their redox activity mostly unaffected. This enables efficient synthesis of imines in high to excellent selectivity via aerobic oxidation of structurally diverse aryl amines.     

Atomically Dispersed Pd Atoms on a Simple MgO Support with an Ultralow Loading for Selective Hydrogenation of Acetylene to Ethylene

We report a simple and efficient Pd/MgO catalyst loaded with ppm level of Pd (7.8 ppm) for semi-hydrogenation of acetylene to ethylene. The catalyst showed excellent performance with high acetylene conversion (97%), high ethylene selectivity (89%) and good stability. Moreover, the atomically dispersed Pd atoms are inactive for ethylene hydrogenation. Isotopic and FTIR results suggest that H₂ dissociates at isolated Pd atoms in a heterolytic manner forming O−H bond, which may account for the high selectivity.     

Novel sponge-like molecularly imprinted mesoporous silica material for selective isolation of bisphenol A and its analogues from sediment extracts

Bisphenol A (BPA) imprinted sponge mesoporous silica was synthesized using a combination of semi-covalent molecular imprinting and simple self-assembly process. The molecularly imprinted sponge mesoporous silica (MISMS) material obtained was characterized by FT-IR, scanning electron microscopy, transmission electron microscopy, and nitrogen adsorption–desorption measurements. The results show that the MISMS possessed a large specific surface area (850.55 m² g⁻¹) and a highly interconnected 3-D porous network. As a result, the MISMS demonstrated a superior specific adsorption capacity of 169.22 μmol g⁻¹ and fast adsorption kinetics (reaching equilibrium within 3 min) for BPA. Good class selectivity for BPA and its analogues (bisphenol F, bisphenol B, bisphenol E and bisphenol AF) was also demonstrated by the sorption experiment. The MISMS as solid-phase extraction (SPE) material was then evaluated for isolation and clean-up of these bisphenols (BPs) from sediment samples. An accurate and sensitive analytical method based on the MISMS–SPE coupled with HPLC–DAD has been successfully established for simultaneous determination of five BPs in river sediments with detection limits of 0.43–0.71 ng g⁻¹ dry weight (dw). The recoveries of BPs for lyophilizated sediment samples at two spiking levels (50 and 500 ng g⁻¹ dw for each BP) were in the range of 75.5–105.5% with RSD values below 7.5%.